Hubei Cono Technology Co,Ltd
Nothing is invisible
Add to Cart
Our advantages :
◆ Ergonomic design with five-position thumbstick for one-hand operation
◆ Intelligent Coloration,
Intelligent coloration allows the user to better bring out the target or the background depending on conditions.
◆ Automatic Stadiametric Rangefinder
The thermal sight version is equipped with an automatic stadiametric range finder which allows the user to estimate the approximate distance to an object of known size.
| Technical Data Sheet of Thermal Imager NightSeer 350 Series | |
| NS350-R | |
| Microbolometer | |
| Type | Uncooled |
| Resolution, pixels | 384×288 |
| Frame Rate, Hz | 50 |
| Pixel size, um | 17 |
| NETD | less than 50mk |
| Optical Characteristics | |
| Objective Lens | 50mm, F/1.1 |
| Magnification, X | 2.7 |
| Zoom | 2x/PIP/4X |
| Eye Relief, mm | 60mm |
| Dioptre Adjustment, D | ±5 |
| FOV | 7.4°×5.6° |
| Close-up range,m | 5 |
| Display | |
| Type | OLED |
| Resolution, pixel | 1024×768 |
| Detection Range (1.7m target) | 1800 |
| Recognition Range (1.7m) | 600 |
| Detection Range (2.3m target) | 2400 |
| Recognition Range (2.3m) | 800 |
| Reticle | |
| Accuracy(per pixel) | 0.43MOA |
| Click range(x,y) | 165 MOA |
| Power Supply | |
| Battery Type | 2XCR123 |
| Power Supply | 3.6～7.2 |
| External Power Supply | 5v USB |
| Operation Time on a battery set(standard version),h | 5 |
| Operation Time on external battery pack(standard version),h(13000mAh) | 44 |
| Video recorder (optional) | |
| Video/Photo format | avi/jpg |
| Built-in memory(optional) | 32G |
| Wifi Channel(optional) | |
| Frequency | 2.4 |
| Reception range,m | 15 |
| Physical Parameters | |
| Degree of Protection | IP67 |
| Operation Temperature | —25°C～+50°C |
| Storage Temperature | —40°C～+70°C |
| Shock and Vibration | 1000g/ms |
| MTBF | More than 800h |
| Weight without batteries,g | 415 |
| Dimension, mm | 193×65×67 |
SALES & SERVICE
We understand that as a manufacturer it is important to work tightly with our distributors to support customers from different regions. We try our best to make sure all customers can get proper training of our device and good after-sell service when any kind of failure occurs.
QUALITY CONTROL
We understand that, in some cases, lives may depend on the performance of our products, that is why every unit that leaves our facility must pass tough quality control standards testing.
It is our mission to continue to design, build, test and ship the very best optoelectronics devices on the market.