Hubei Cono Technology Co,Ltd
Nothing is invisible
Add to Cart
The Orion introduces thermal imaging to any standard daytime optic—no re-zeroing needed. Fastened in front of a magnified sight via quick-release mount, it brings state-of-the-art thermal technology to an existing set-up in seconds. Detect targets in complete darkness or through atmospheric obscurants without the need to remove daytime optics.
Advantages:
| Technical Data Sheet | |
| Orion350C | |
| Detector | |
| Type | Uncooled |
| Resolution | 384×288 |
| Frame Rate | 50Hz |
| Pitch | 17μm |
| Spectral range | 8-14μm |
| NETD | less then 50mk |
| Optical Characteristics | |
| Objective lens | 50mm |
| Magnification | 2.0x |
| FOV | 7.4°×5.6° |
| Close-up range | 5m |
| Eye Relief | 60mm |
| Dioptre Adjustment | -5D-4D |
| Functions | |
| Zoom | 2x/4x/PIP |
| Palette | 10 optional(can be customized) |
| Startup time | less than 5 seconds |
| Startup image | Can be customized |
| Menu and information | GUI(Can be customized) |
| Image Enhancement | DDE |
| Contrast and Brightness | AGC |
| Online update | Both code and GUI resources |
| reticle type | 5 optional(Can be customized) |
| ballistic and zeroing | 5 types can be created by user |
| Range finder | Software Approximate ranging |
| Display | |
| Type | OLED |
| Resolution | 1024×768 |
| Power Supply | |
| Battery | 2×CR123 |
| External Power Supply | 5V micro USB |
| Operation Time | 5h with WIFI OFF 2h with WIFI ON |
| Physical Characteristics | |
| weight without battery | 500g |
| size,(mm) | 180×61×65 |
| Environmental Compatibility | |
| Waterproof | IP67 |
| Operating Temperature | -25℃-50℃ |
| Storage Temperature | -40℃-70℃ |
| shock tolerance | 1200g/ms |
| Operating Temperature | -25℃-50℃ |
| Storage Temperature | -40℃-70℃ |
| shock tolerance | 1200g/ms |
| Wi-fi | |
| Frequency | 2.4GHz |
| Standard | 802,11 b/g/n |
| Line-of-sight reception range, m | 15 |
| On-Board Recording | |
| Capacity | 32G |
We understand that lives may depend on the performance of our products, that is why every unit that leaves our facility must pass tough quality control standards testing.
It is our mission to continue to design, build, test and ship the very best optoelectronics devices on the market.
